Panel Mount PRO
TPU Connector Panel Mount, including high quality connectors and hardware.
The Panel Mount PRO is perfect for organising your motorphase and sensor wires in a stealthy and premium way.
Both panel sections are made from TPU ensuring an automatic seal when tightened. The Male black MR60's can be epoxied into the panel.
Recommended for underboard enclosures, fits 1 - 5 mm thick enclosure walls. Do not overtighten the bolts, this can lead to the nut rotating in the pocket.
When soldering the sensor wires onto the connector pins make sure you assign each colour to a specific pin number! (numbers are labeled on connector) this way you are sure the right wires are going to the esc sensor connector/pins.
Cutout Guide (PRO VERSION ONLY):
2x TPU panel
4x M4 x16 mm bolt and M4 nut
2x GX12 6 pin Sensor wire aviation connector
2x Black MR60 Male
2x BlackMR60 Female
Length: 130 mm
Width: 22 mm
Height: 7 mm (per panel halve)
Weight: 90 grams (incl. hardware)